Alarm Lock ETPLN Guia do Utilizador descarregar pdf (Página 36)

36 DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE

Tools > Manually Add a Lock to the Selected Gateway

Use the Add Lock Serial Number screen to manually add a specific lock serial number to a selected Gateway.

This screen is typically used when removing a broken lock from a door (and adding a new lock), or when moving a lock

from one Gateway to another Gateway. Type all characters of the serial number, do not include dashes or spaces.

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click to

highlight a specific Gateway in the list, then click Tools, Manually Add a Lock to the Selected Gate-

way.

Carefully type the lock's unique factory serial number located

on the lock housing.

We recommend that when installing the lock on the door a

yellow-colored "Lock ID Card" (see the "SAVE THIS LOCK ID

CARD" image) be completed. These Lock ID Cards are a

useful way to organize lock information, including lock serial

numbers.

Lock Serial Number

Click the Lock Model Type pull-down and highlight the

wireless lock model ("DL6100", "PDL6100", etc.).

Lock Model Type

~ LOCK ID CARD ~

LOCK MODEL _________________________________

FACTORY SERIAL NUMBER _______________________

INSTALLED LOCATION ___________________________

__________________________________________

When installing lock, please fill in all information on

this card. This information will be used when add-

ing network locks to DL Windows. Keep this card in

a safe place. Do not discard!

OI353 10/08

ALARM LOCK

SAVE THIS LOCK ID CARD

Add Lock

Click Add Lock to assign ("add") the specified lock serial

number to the selected Gateway and close the screen, or click

Close to exit without adding.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

Sem comentários

Alarm Lock ETPLN Guia do Utilizador Página 36