Alarm Lock DL5300 Manual de Instruções descarregar pdf (Página 4)

Supported Products

Data Transfer Module (AL-DTM)

An AL-DTM can be used to transfer Lock Programs (and other data) between DL-Windows and locks. When

computers cannot be transported or when electrical power is not available, the hand-held AL-DTM device acts as

a go-between--it allows the transfer of lock data from the computer (through the AL-DTM) and to the lock, or in

reverse (from the lock through the AL-DTM back to the computer). The AL-DTM can only be used on the

Primary Lock Side where the standard red and black communication port is located. Note: Only 5000 of

the most recent events are transferred using the AL-DTM.

Infrared Printer (AL-IR1)

An AL-IR1 printer is used to print Audit Trails and User Code lists without the need for a PC. Its infrared

reader means no cable connection to the lock is needed. The AL-IR1 printer can only be used on the

Primary Lock Side where the infrared transmitter LED is located.

Double-ended Mini Banana Plug Connector

After you create the program in DL-Windows and transfer the program from your computer to an AL-DTM,

transfer the program from the AL-DTM to the lock(s) via this double-ended mini banana plug. The 2-pin

banana plug connector is polarity sensitive. The TAB (marked “GND”) side must be plugged into the

lock’s black (left) terminal (located on the Primary Lock Side).

AL-PCI Cable

An ALARM LOCK AL-PCI cable is required to communicate between your computer’s RS-232 serial com-

munications port (COM 1-4) and the AL-DTM or lock. One end of the AL-PCI cable is designed to be used

on a 9-pin serial Com Port. If your computer has a 25-pin Com Port only, a 25-pin to 9-pin adapter must be

used. The other end of the AL-PCI cable features a 2-pin banana plug connector which is polarity sensitive-

-the TAB (marked “GND”) side must be plugged into the lock’s black (left) terminal (located on the Primary

Lock Side).

USB to RS-232 Cable

If your computer does not have a serial COM port (DB-9 male) available, you can plug your AL-PCI2 cable

into a special USB to RS-232 cable. Order part MX1130 for the USB to RS-232 cable only, or ALPCI2-U

for both the USB to RS-232 cable and an AL-PCI2 cable.

1 2 3 4 5 6 7 8 9 ... 35 36

Sem comentários

Alarm Lock DL5300 Manual de Instruções Página 4