Alarm Lock DL5300 Manual de Instruções descarregar pdf (Página 24)

;62 ; [ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :

(User Number) (User Code)

60. Number of Attempts Before Lockout

61. Set the Attempts Lockout Time

LOCKOUT

; 6 4 :

64. Disable Remote Input

Remote Input

; 6 5 :

65. Enable Remote Input

66. Reserved

• Number of attempts before lockout must be 1-9 attempts.

• The number of attempts is reduced by half every time the keypad is locked out without a successful code entry (default is

6 attempts).

• The attempt count is reset each time a valid code is entered.

• Lockout Time must be 1-60 seconds.

How long the keypad is locked-out after a series of unsuccessful attempts (default is 18 seconds).

• Wire a Normally Open Contact to Wires (White & White). Momentarily close switch to unlock door to allow person to pass through door.

• Enter the functions below to Disable/Enable the Remote Input.

NOTE: The Remote Input is enabled as part of the default program.

REMOTE INPUT

; 6 0 ; [ _ ] :

(Number of Attempts)

; 6 1 ; [ _ _ ] :

(Lockout Time)

Programming Functions (cont'd)

59. Reserved

62. Add/Delete/Change User Codes 2-2000

(for Primary Side code entry)

• User Number must be between 2 and 2000. User Codes entered are enabled for use with the Primary side keypad only.

• To delete a code, leave the User Code blank and wait for the rapid beeping to stop, then press and hold : for three seconds

to exit Programming Mode. If more programming is desired, re-enter Programming Mode.

• User Code must be 3-6 digits.

• Each User Code can be thought of as a person. As long as each person possesses their own unique User Code, you can con-

trol access to the lock by adding or deleting User Codes. See "Terminology Used in this Manual" on page 6 for more information.

;63 ; [ _ _ _ _ ] ; [ _ _ _ _ _ _ ] :

(User Number) (User Code)

63. Add/Delete/Change User Codes 2-2000

(for Secondary Side code entry)

• Same as Function 62, except User Codes entered are enabled for use with the Secondary side keypad only.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sem comentários

Alarm Lock DL5300 Manual de Instruções Página 24