Alarm Lock Trilogy DL4500 Manual de Instruções descarregar pdf (Página 8)

USER TYPE USER NUMBER

GROUP DEFAULT

ASSOCIATION

MINIMUM PROGRAM

LEVEL (See page 6)

Master Code 1 -

(All Programming Abilities)

Installer Codes 2 & 3 none

(Also 3, 2, 1)

Manager Codes 4 - 6 none

(Also 2, 1)

Supervisor Codes 7 - 9 none

(Also 1)

Print Only Codes 10 - 11 none

Basic User Codes 12 - 50 none none

Basic User Codes Group 1 51 - 100 1 none

Basic User Codes Group 2 101 - 150 2 none

Basic User Codes Group 3 151 - 200 3 none

Basic User Codes Group 4 201 - 250 4 none

Basic User Codes 251 - 296 none none

Quick Enable User 300 Code 297 none none

Quick PC Access Code 298 none none

AL-DTM Code 299 none none

Service Code 300 none none

Basic User Codes 301-2000 none none

Lock Defaults for the

DL4100 and DL4500

Users added

will default to a Group Association and a Program Level Ability as follows:

User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.

NOTES:

The Programming Level defines the range of programming tasks

a User is allowed to perform. The higher the Level, the more pro-

gramming tasks the User is allowed (with Master allowing ALL

tasks).

Note: Since the Programming Level is closely associated with

the type of User and their abilities, a User who holds a certain

Programming Level is sometimes referred to by their “

User

Type

”.

For example, DL Series locks can hold hundreds of Users in its

programming memory, and each User is associated with a User

Number (see definition of "User Number" in the previous

"Terminology" section) and therefore a specific Programming

Level, as follows:

Master: Always associated with User number 1. Is always en-

abled and can program all functions. (Abbreviated as

Programming Level = M).

Installer:

Always associated with Users 2 and 3. Can program

all functions except changing the Master Code. (Abbreviated

as Programming Level = 4).

Manager: Always associated with Users 4, 5, and 6. Can pro-

gram all functions except functions relating to lock

configuration. (Abbreviated as Programming Level = 3).

Supervisor: Always associated with Users 7, 8 and 9. Can only

program functions relating to day to day operation.

(Abbreviated as Programming Level = 2).

Print Only Users: Always associated with Users 10 & 11.

Restricted to print audit trails only. No other programming

ability allowed. (Abbreviated as Programming Level = 1).

Basic Users: Always associated with User number 12 and

higher (except 297-300). No programming ability allowed.

Programming Levels are hierarchical--higher levels are allowed to

do anything the levels below them can do. For example, if you

are a Manager, you are allowed to do anything that Supervisors,

Print-Only Users and Basic Users can do in addition to those

tasks allowed for Managers (Level 3).

Programming Levels

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 39 40

Comentários a estes Manuais

Sem comentários

Alarm Lock Trilogy DL4500 Manual de Instruções Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de segurança - controlo de acesso Alarm Lock Trilogy DL4500